- Speakers[6]
- Plastic Crafts[2]
- Other Consumer Electronics[4]
- Other Gifts & Crafts[6]
- Professional Audio[4]
- USB Flash Drives[1]
- Mouse Pads[1]
- USB Hubs[1]
- Electrical Plugs & Sockets[1]
- Weighing Scales[5]
- Household Scales[1]
- Other Household Sundries[1]
- Mobile Phone Batteries[2]
- Inverters & Converters[1]
- USB Gadgets[3]
- Mouse[1]
- Gift Sets[4]
- Contact Person : Mr. Soon Jerry
- Company Name : Zhongshan Langfei Electronic Appliance Co., Limited
- Tel : 86-755-82824432
- Fax : 86-755-82824476
- Address : Guangdong,Shenzhen,Room 239-240 Building 2,
- Country/Region : China
- Zip : 518000
Related Product Searches:4USB Port Travel Adapter,High Quality,universal travel adapter, usb travel adapter,CT-2231
1.Specifications
with 4 input plug suit for all over the world with 4 USB output with CE ROHS FCC
This specification defines the performance characteristic of an AC/DC switching adapter. The adapter must comply with all the requirements of the specifications and drawing herein. The requirements can be subject to revision in the future discussion.
2. Electrical Performance and Tests
2.1. Input
Voltage: AC100V ~240V
Frequency: 50/60Hz
Current: Maximum 330mA @ 100VAC and maximum 180mA @ 240VAC
Inrush Current: <20A@240VAC 50Hz (COOL)
Standby power: <0.5W
Rating Input load power: 16W
Starting Time <1S@240VAC Io=100%
2.2. Output
Voltage: 5.0V + 0.25V
Current: 2.0A
Ripple & Noise: Maximum150mV P-P @ Io=100%
Note: 20MHz bandwidth ripple & noise is measured by using 0.1uF C.C. & 47uF E.C. bypassed at the output connector.
2.3. Particular Electrical Performance
The adapter is able to charge for IPOD product, Motorola V3 mobile telephone, Sony PSP and PC USB equipment.
2.4. Hi-pot Test
Applying 3000VAC for 1 minute, leakage current must be less than 5mA.
2.5. Insulation Resistance
Minimum 100M ohms @ DC500V
2.6. Short Circuit Protection
No damage to this power supply when output shorted to ground. When the short-circuited is removed, the adapter shall promptly recover its normal operation.
3. Mechanical Tests and Requirements
3.1. Drop Test
Drop height: 1.0m above 50mm hardwood.
Method: Total 4 times. Drop one time for each of the 4 case surfaces.
Expected result: After drop test, the unit should still operate properly. Small nick or slight deformation may be accepted.
4. Environmental Conditions
4.1. Operating Temperature
0°C ~ +40°C
4.2. Storage Temperature
-20°C ~ +65°C
4.3. Humidity
90%RH Non-condensing
5. Electromagnetic Compatibility
5.1. Conducted Emission
Meets class B of EN55022 & FCC part 15
6.2. Radiated Emission
Meets class B of EN55022 & FCC part 15
55mm X 55mm X 29.3mm
4USB Port Travel Adapter